Precautions for precision parts processing

When processing precision parts, the operator must maintain a correct posture and have sufficient mental substance to arrange work. If he finds physical discomfort, in order to ensure personal safety, immediately remove the job and report to the production Workshop supervisor or higher level person reflects. The concept of practical operation is gathered, chatting is prohibited, and mutual cooperation is prohibited. Operators should not practice in the case of irritability and fatigue, so as to ensure personal safety, avoid accidents and ensure safe operation. Before entering the workplace, all employees are asked whether their dress suits the job requirements. What else should be paid attention to in the processing of precision parts? Let's find out together.

1. Before the machining of precision parts, check whether the moving parts of the equipment are lubricated, and then start and check the clutch, whether the braking system is normal, and idling the CNC lathe parts. Rotate for 1-3 minutes, and the actual operation is prohibited when the mechanical equipment has common faults;

2. When machining precision parts, keep the correct posture and have sufficient If you feel unwell, you should leave your post immediately and report to your superiors. In practice, the concept is concentrated, gossip is prohibited, and each other is cooperated. All employees should check whether their dress conforms to the standard requirements before entering the post. Sandals, high-heeled shoes and harmful clothing are not allowed, and hats must be worn if you have long hair; Only after the motion unit stops running, can the grinding tool be installed and adjusted. After the installation and adjustment, move the pump flywheel forcefully to test for 2 times to check whether the left and right abrasives are symmetrical, whether they are effective, whether the screws are firm, and whether the edge wrapping ring is in the effective position;

4. After all other staff have left the working area of u200bu200bthe mechanical equipment and removed the dirt on the workbench, the mechanical equipment can be turned on;

5. During the processing of precision parts, it is strictly forbidden to put your hand into the working area of u200bu200bthe guide rail and slide plate, and do not forcefully pick and place the product workpiece. A special tool suitable for picking and placing product workpieces in the blanking die. If it is found that the machine equipment has abnormal noise or the equipment is abnormal, the main switch should be turned off immediately for inspection. After the machine equipment is started, one person shall transport it to the machine for actual operation. Others shall not press the electric construction or step on the button switch board, let alone put their hands into the working area of u200bu200bthe machine or forcefully touch the moving parts of the machine.

6. After get off work, the idle switch power supply should be turned off, and the workpieces, leftovers and dirt should be cleaned up to ensure a clean office environment.

The above are the precautions for precision parts processing, I hope to be helpful to you, if you want to know more information about precision parts processing, Welcome to consult customer service online or call our service hotline (upper right corner of the website), we will be happy to provide you with quality service!