Precautions for CNC machining of clamping tools

During the whole process of CNC machining, different main parameters of CNC inserts will form different drilling shapes, thus forming different tool shapes. Direct hazard to the reliability and process performance of the entire drilling process. In an ideal situation, a circular arc-edged diamond blade is used for milling. When processing soft metal materials, contour peaks and contour valleys will be generated on the machined surface of the product workpiece. The distance between them is called the basic theoretical surface roughness. Its size is equivalent to f2/8 R (f is the cutting speed, R is the arc semi-longitude of the CNC insert). So what aspects need to be paid attention to when CNC machining tools? Let us master the following sentence:

1. The tool must be clamped firmly, not too short in the collet;

2. Before each cable cutter, check whether the CNC machining blade meets the requirements. The cable cutter length should be determined according to the production and processing depth value indicated in the process table. Generally, a cable cutter that is slightly better than 3 mm should be considered. Check whether the collet has a collision;

3. In the case of very deep production and processing depth, you can communicate with the programmer, and consider using 2 times as appropriate. The method of the knife is to shorten the length from half to 2/3 first, and then make the cable longer when the production and processing to the deeper part, which can improve the high efficiency of production and processing;

4. When using the extension cable, especially to grasp the depth of the knife, it is necessary to use the data information such as the knife length;

5. Before the CNC machining blade is installed on the machine, the parts where the finish matches each other should be wiped clean with a cleaning towel, and the opposite parts of the CNC lathe tool sleeve are also clean, so as to prevent iron pins on the mating surfaces from harming the precision and damaging the CNC lathe;

6. Generally, the sharp knife setting method is used for the length of the CNC blade (the case of the tool setting in the state), and the tool setting should be carefully checked on the program flow table. Tool status;

7. When the program ends or the tool is calibrated again, you should pay attention to whether the deep tool can be connected to the front. Generally, you can adjust 0 first. mm line, and then adjust it according to the state;

8. Rotary retractable blade, if water-soluble cutting oil is used, it should be used every half month or so Grease soaks for several minutes for maintenance, which can lubricate the internal parts of the blade and prevent damage.

The above are the precautions for CNC machining of clamping tools, I hope to help you, if you want to know more about CNC machining, welcome online consultation or Call our service hotline (upper right corner of the website) for consultation, we will be happy to provide you with quality service!