Do you know the surface processing of CNC precision parts processing?

Regarding the surface processing of CNC precision parts processing, when we carry out the surface processing of CNC precision parts processing, it first depends on the technical requirements of the machined surface, but it should be noted that these technical requirements are not necessarily part drawings. The specified requirements may sometimes be higher than the requirements on the part drawing due to technological reasons. For example, due to the misalignment of the benchmarks, the processing requirements for the surface of some CNC precision parts are increased. Or because it is used as a precision benchmark, it may put forward higher processing requirements.

When the technical requirements for the machining surface of each cnc precision part are clarified, the final machining method that can guarantee the requirements can be selected accordingly, and the required time is determined. Each step and the processing method of each step. The selected cnc precision parts processing method should meet the requirements of parts quality, good processing economy and high production efficiency.

After understanding the above consultation, we should consider the following factors when understanding CNC processing:

1. Any kind of CNC processing method The machining accuracy and surface roughness that can be obtained have a considerable range, but only in a narrow range is economical, and the machining accuracy in this range is the economic machining accuracy. For this reason, when selecting the processing method, the corresponding processing method that can obtain economical processing accuracy should be selected.

2. Consider the properties of CNC precision parts processing materials.

3. The structural shape and size of CNC precision parts should be considered.

4. Consider productivity and economic requirements. High-efficiency advanced technology should be used in mass production. It is even possible to fundamentally change the manufacturing method of the blank, which can reduce the labor of machining.

5. The existing equipment and technical conditions of the factory or workshop should be considered. When choosing the processing method, the existing equipment should be fully utilized, the potential of the enterprise should be tapped, and the Worker motivation and creativity. However, it should also be considered to continuously improve the existing processing methods and equipment, adopt new technologies and improve the technological level.