What should be paid attention to when CNC lathe processing?

The CNC lathe processing industry is developing rapidly, and the competitive pressure for enterprises is also increasing. Whether it is in processing technology or processing quality, it is constantly improving and innovating. In this era of fierce competition, enterprises can only meet customer needs and win the market by ensuring good quality, good service and continuous innovation capabilities. Then, what should we pay attention to when processing CNC lathes?

1. Check whether the moving parts are filled with lubricating oil before mechanical work, then start and check whether the clutches and brakes are normal, and run the machine tool for 1-3 minutes.

2. Maintain the correct posture at work, and have sufficient energy to cope with the work. If you find that you are not feeling well, you should leave the job immediately and report to the leader. When operating, it is necessary to concentrate on thinking, and it is strictly forbidden to chat and cooperate with each other. The operator should not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the workplace, all employees check whether their clothing conforms to the work requirements. Slippers, high-heeled shoes and clothing that affect safety are not allowed, and those with long hair must wear a helmet.

3. When replacing the mold, first turn off the power supply, and then start to install and debug the mold after the movement of the punch press stops. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.

4. Wait until all other personnel leave the mechanical work area and take away the sundries on the workbench before starting the power supply to start the machine.

5. When the machine is working, it is forbidden to put your hand into the working area of ​​the slider, and it is strictly forbidden to take and place the workpiece by hand. Use standard tools when picking and placing workpieces in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection. After the machine is started, one person shall transport the materials and operate the machine. Others shall not press the electric construction or step on the foot switch, let alone put their hands into the working area of ​​the machine or touch the moving parts of the machine with their hands.

6. When leaving get off work, the power supply should be turned off, and the finished products, scraps and sundries on the post should be sorted out to ensure a clean and safe working environment.