Attention flow about CNC machining parts

With the popularity of CNC machining, of course, many CNC machining manufacturers have begun to rise. Every CNC machining manufacturer wants to make the company bigger, so there must be a certain process. Today we are going to talk about the attention process of CNC machining parts.

1. When CNC machining parts, the protective door must be closed, and the head and hands are not allowed to be stretched into the protective door, and the protective door is not allowed to be opened during the machining of mechanical parts.

2. During the CNC machining process, the operator is not allowed to leave the machine tool without authorization, and should keep a high degree of concentration and observe the running state of the machine tool. In the event of an abnormal phenomenon or accident, the program should be terminated immediately, the power should be cut off, and the instructor should be reported to the instructor in time, and no other operations are allowed;

3. Touch the display. It is strictly forbidden to knock on the table, dividing head, fixture and guide rail;

4. It is strictly forbidden to open the control cabinet of the numerical control system for viewing and touching;

< /p>

5. The operator shall not arbitrarily change the internal parameters of the machine tool. Intern students are not allowed to call or modify other programs not compiled by themselves; Operation;

7. The CNC machining center is a large-scale precision machining equipment. Except for the tooling and workpieces placed on the worktable, it is strictly forbidden to stack any tools, clamps, blades, measuring tools on the machine tool. , workpieces and other sundries;

8. It is forbidden to touch the tool tip and iron filings by hand, and the iron filings must be cleaned with iron hooks or brushes;

9. It is forbidden to touch the rotating spindle, workpiece or other moving parts by hand or in any other way;

10. The machining process is prohibited Measure the workpiece in the middle of the process, manually change the speed, and do not wipe the workpiece with cotton silk, nor clean the machine; Check the ' , -' signs in each direction of the machine X, Y, and Z axes before moving. When moving, turn the handwheel slowly to observe that the moving direction of the machine tool is correct before speeding up the moving speed;

12. The measurement can be carried out after the spindle stops to avoid personal accidents;

13. If the machine tool is not used for several days, the NC and CRT parts should be powered on for 2-3 hours every other day;

14. Clean and maintain the machine guide rails regularly;

15. When shutting down, wait for the spindle to stop 3 It can be turned off after a few minutes.